|
HP ProCurve MSM710 Mobility Controller
(J9325A)
|
HP ProCurve MSM760 Mobility Controller
(J9420A)
|
HP ProCurve MSM765zl Mobility Controller
(J9370A)
|
| Ports |
|
2 RJ-45 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
1 RS-232C DB-9 console port
|
2 RJ-45 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
|
|
| Physical characteristics |
| Dimensions |
7.5(d) x 10(w) x 1.74(h) in. (19.05 x 25.4 x 4.42 cm) |
15.38(d) x 17.32(w) x 1.75(h) in. (39.07 x 43.99 x 4.45 cm) (1U height) |
10.3(d) x 8.13(w) x 1.75(h) in. (26.16 x 20.65 x 4.45 cm) |
| Weight |
6 lb. (2.72 kg) |
13.45 lb. (6.1 kg) |
2.05 lb. (0.93 kg) |
| Mounting |
|
1U rack mountable with HP ProCurve MSM710 Controller Rack Mounting Kit (J9404A)
|
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only.
|
Install the blade in any of the following chassis:
HP ProCurve Switch 5406zl J8697A
HP ProCurve Switch 5412zl J8698A
HP ProCurve Switch 8212zl J8715A
|
| Environment |
| Operating temperature |
41ºF to 122ºF (5ºC to 50ºC) |
41ºF to 104ºF (5ºC to 40ºC) |
|
| Operating relative humidity |
20% to 90%, non-condensing |
15% to 80%, non-condensing |
|
| Non-operating/Storage temperature |
-40ºF to 176ºF (-40ºC to 80ºC) |
-40ºF to 149ºF (-40ºC to 65ºC) |
-40ºF to 158ºF (-40ºC to 70ºC) |
| Non-operating/Storage relative humidity |
5% to 95%, non-condensing |
|
15% to 95%, non-condensing |
| Electrical characteristics |
| Description |
IEEE 802.3af PoE compliant, or 48 VDC input from included AC power supply |
|
IEEE 802.3af PoE compliant or 48 VDC input from included AC power supply |
| Maximum heat dissipation |
|
434 BTU/hr (457.87 kJ/hr) |
|
| Voltage |
100-240 VAC |
100-127 / 200-240 VAC |
100-240 VAC |
| Current |
0.2 / 0.1 A |
2 / 1 A |
1.0 / 0.4 A |
| Maximum power rating |
6 W |
|
|
| Frequency |
50 / 60 Hz |
50 / 60 Hz |
50 / 60 Hz |
| Safety |
|
UL 60950-1
|
CAN/CSA 22.2 No. 60950-1
IEC 60950-1
EN 60950-1
|
UL 60950-1
|
| Features |
|
Supported :
– IEEE 802.11 n/a/b/g Access Points and/or Access Devices
– 10 Access Points and/or Access Devices
– Unlimited simultaneous users
– 100 simultaneous guest Access users
Included Services :
– WLAN Management
– Guest Access
– Captive Portal
– PCI - DSS compliant for wireless PoS traffic
– Real Time Location Services (RTLS)
– Advanced Roaming (Layer 2 - Layer 3 Mobility)
– VoWLAN
|
Supported :
– IEEE 802.11 n/a/b/g Access Points and/or Access Devices
– 40 - 200 (increments of 40) Access Points and/or Access Devices
– Unlimited simultaneous users
– 1000 simultaneous Guest Access users upgradeable in increments of 250 per 40 license pack to max of 2000 supported users
Included Services :
– WLAN Management
– Guest Access
– Captive Portal
– PCI - DSS compliant for wireless PoS traffic
– Real Time Location Services (RTLS)
– Advanced Roaming (Layer 2 - Layer 3 Mobility)
– VoWLAN
|
Supported :
– IEEE 802.11 n/a/b/g Access Points and/or Access Devices
– 40 - 200 (increments of 40) Access Points and/or Access Devices
– Unlimited simultaneous users
– 1000 simultaneous Guest Access users upgradeable in increments of 250 per 40 license pack to max of 2000 supported users
Included Services :
– WLAN Management
– Guest Access
– Captive Portal
– PCI - DSS compliant for wireless PoS traffic
– Real Time Location Services (RTLS)
– Advanced Roaming (Layer 2 - Layer 3 Mobility)
– VoWLAN
|
| Notes |
|
|
|
A maximum of four MSM765zls can be installed in the same chassis and a maximum of three MSM765zls are supported in the 5406zl.
|
