| HP ProCurve Switch 8108fl
(J8727A) | HP ProCurve Switch 8116fl
(J8728A) |
|---|
| Included accessories |
| 1 HP ProCurve Switch fl Redundant Management Module (J8731A)
1 HP ProCurve 8108fl Redundant Switch Fabric Module (J8729A)
1 HP ProCurve Switch fl Redundant Power Supply (J8732A)
| 1 HP ProCurve Switch fl Redundant Management Module (J8731A)
1 HP ProCurve 8116fl Redundant Switch Fabric Module (J8730A)
2 HP ProCurve Switch fl Redundant Power Supply (J8732A)
|
| Ports |
| 8 open module slots
Supports a maximum of 80 auto-sensing 100/1000 ports or 16 10-GbE ports or 80 mini-GBICs, or a combination
| 16 open module slots
Supports a maximum of 160 auto-sensing 100/1000 ports or 32 10-GbE ports or 160 mini-GBICs, or a combination
|
| Power supplies |
| includes: 1 x J8732A
2 open power supply slots
| includes: 2 x J8732A
1 open power supply slots
|
| Physical characteristics |
| Dimensions | 21.5(d) x 17.3(w) x 22.7(h) in. (54.61 x 43.94 x 57.66 cm) (13U height) | 21.5(d) x 17.3(w) x 34.8(h) in. (54.61 x 43.94 x 88.39 cm) (20U height) |
| Weight | 219.7 lb. (99.66 kg)1 8-slot chassis, 2 switch fabric modules, 2 management modules, 2 fan trays, 3 power supplies, 8 internal modules, Fully loaded | 340 lb. (154.22 kg)1 16-slot chassis, 2 switch fabric modules, 2 management modules, 2 fan trays, 3 power supplies, 16 internal modules, Fully loaded |
| Memory and processor |
| Fabric | PowerPC IBM405 @ 266 MHz, 16 MB flash, 16 MB SRAM, 256 MB SDRAM | PowerPC IBM405 @ 266 MHz, 16 MB flash MB, 16 MB SRAM, 256 MB SDRAM |
| Interface Module | PowerPC IBM405 @ 266 MHz, 16 MB flash, 256 MB SDRAM; packet buffer size: 128 MB RL-DRAM per module | PowerPC IBM405 @ 266 MHz, 16 MB flash, 256 MB SDRAM; packet buffer size: 128 MB RL-DRAM per module |
| Management Module | PowerPC MPC7410 @ 400 MHz, 16 MB flash, 512 MB compact flash, 1 GB SDRAM | PowerPC MPC7410 @ 400 MHz, 16 MB flash, 512 MB compact flash, 1 GB SDRAM |
| Mounting |
| Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only. Requires 2 or more persons or lift-jack assistance.
| Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only. Requires 2 or more persons or lift-jack assistance.
|
| Performance |
| Latency | < 25 µs (FIFO 64-byte packets) | < 25 µs (FIFO 64-byte packets) |
| Throughput | up to 119 million pps | up to 238 million pps |
| Routing/Switching capacity | 160 Gbps | 320 Gbps |
| Routing table size | 100000 entries | 100000 entries |
| Environment |
| Operating temperature | 41ºF to 104ºF (5ºC to 40ºC) | 41ºF to 104ºF (5ºC to 40ºC) |
| Operating relative humidity | 15% to 80% @ 104ºF (40ºC), non-condensing | 15% to 80% @ 104ºF (40ºC), non-condensing |
| Non-operating/Storage temperature | -40ºF to 158ºF (-40ºC to 70ºC) | -40ºF to 158ºF (-40ºC to 70ºC) |
| Non-operating/Storage relative humidity | 0% to 90% @ 149ºF (65ºC), non-condensing | 0% to 90% @ 149ºF (65ºC), non-condensing |
| Altitude | up to 15000 ft. (4.57 km) | up to 15000 ft. (4.57 km) |
| Electrical characteristics |
| Maximum heat dissipation | 5119 BTU/hr (5401 kJ/hr) | 10238 BTU/hr (10801 kJ/hr) |
| Voltage | 100-125 / 200-240 VAC | 100-125 / 200-240 VAC |
| Current | 15 / 7 A | 30 / 15 A |
| Power consumption | 1500 W | 3000 W |
| Frequency | 50 / 60 Hz | 50 / 60 Hz |
| Notes | Maximum power rating is the worst-case theoretical maximum power number with fully loaded PoE, 100% traffic, all ports plugged in, and all modules populated. | Maximum power rating is the worst-case theoretical maximum power number with fully loaded PoE, 100% traffic, all ports plugged in, and all modules populated. |
| Safety |
| CSA 22.2 No. 60950
EN 60950/IEC 60950
UL 1950 3rd edition
UL 60950-1
CAN/CSA 22.2 No. 60950
CAN/CSA 22.2 No. 60950-1
EN 60825
| CSA 22.2 No. 60950
EN 60950/IEC 60950
UL 1950 3rd edition
UL 60950-1
CAN/CSA 22.2 No. 60950
CAN/CSA 22.2 No. 60950-1
EN 60825
|
| Notes |
| This product includes software developed by Trimble Navigation, Ltd.
When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g. J4858B, J4859C) are required.
| This product includes software developed by Trimble Navigation, Ltd.
When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g. J4858B, J4859C) are required.
|
The ProCurve Switch 8100fl Series is made up of the first interconnect fabric switches in the industry that focus on delivering a high-availability, high-bandwidth, and cost-effective platform, providing an excellent interconnect for the Adaptive EDGE Architecture™ network. The Switch 8100fl series is streamlined to provide resilient, high-performance connectivity between intelligent edge devices, and it delivers critical features geared toward enabling an Adaptive EDGE Architecture deployment. The Switch 8100fl series enables easy migration to applications that require security, mobility, and convergence decisions at the edge.
