|
Ports
2 redundant power supply ports
Restrictions: 195 W available per port
2 external power supply ports
Restrictions: 398 W available per port
Physical characteristics
Dimensions: 15.4(d) x 17.4(w) x 1.73(h) in. (39.12 x 44.2 x 4.39 cm) (1U height)
Weight: 15.2 lb. (6.89 kg)
Mounting
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Environment
Operating temperature: 32ºF to 131ºF (0ºC to 55ºC)
Operating relative humidity: 15% to 95% @ 104ºF (40ºC), non-condensing
Non-operating/Storage temperature: -40ºF to 158ºF (-40ºC to 70ºC)
Non-operating/Storage relative humidity: 15% to 90% @ 149ºF (65ºC), non-condensing
Altitude: up to 10,000 ft. (3 km)
Acoustic: LwA per ISO 7779: 54.2 dB
Electrical characteristics
Maximum heat dissipation: 400 BTU/hr (422 kJ/hr), for the actual 620 itself. PoE-powered device heat dissipation assumed to be outside the 620.
Voltage: 100-127 / 200-240 VAC
Current: 16 / 8 A
Maximum power rating: 1440 W
RPS power: 390 W
PoE power: 796 W
RPS: 12 V
PoE: -50 V
Frequency: 50 / 60 Hz
Notes: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Above figures are for maximum RPS and PoE power being supplied to two switches simultaneously.
200 - 240 V power cords shipped with the 620 have a wall plug rated as close to 13 A as specific country standards allow.
Safety
CSA 22.2 No. 60950
EN 60950/IEC 60950
UL 60950
Emissions
FCC Class A
VCCI Class A
EN 55022/CISPR 22 Class A
Immunity
EN: EN 55024, CISPR 24
ESD: IEC 61000-4-2
Radiated: IEC 61000-4-3
EFT/Burst: IEC 61000-4-4
Surge: IEC 61000-4-5
Conducted: IEC 61000-4-6
Power frequency magnetic field: IEC 61000-4-8
Voltage dips and interruptions: IEC 61000-4-11
Harmonics: EN 61000-3-2, IEC 61000-3-2
Flicker: EN 61000-3-3, IEC 61000-3-3
Management
Unmanaged power supply; provides information via LEDs (LEDs repeated on front and back panel) or through port interfaces of attached devices
Notes
The ProCurve 620 supports the HP ProCurve Switch 2900 Series (RPS) and 3500yl Series (RPS/PoE), as well as 6200yl (RPS) switches. The HP ProCurve Switch 5400zl Series is not supported.
The ProCurve 620 includes four 2 m RPS/EPS cables. These cables can be used to carry either RPS or PoE power to the switch being powered.
|
| |
